Vrijgave Siemens GAMMA KNX IP Secure Router N 146/03 en IP Secure Interface N148/23

KNX-20E-640 is a 640mA power supply with high efficiency and a small footprint of only 3SU (52.5 mm). The device has a KNX bus choke output and additional output for auxiliary power. LED indicators are used in case of normal operation, overload conditions and RESET operation. It is perfectly suitable to power up any products labeled with the KNX trademark.

De nieuwe i-bus® combi-schakelactoren van ABB zijn ideaal voor individuele woningen en kleine commerciële toepassingen en bieden schakel- en jaloeziefunctionaliteit in een apparaat dat de helft kleiner is.

De firmware-update V4 van IP Control Center N152 heeft uitgebreide veiligheidsfuncties voor een betere bescherming van KNX-systemen. Dit voldoet aan de toenemende beveiligingsvereisten voor de IP Control Center-software.

Wireless security system. Voldoet momenteel alleen aan EN norm, voor beveiliging van uw woning. Buitennmelders voorkomen schade door melding voordat ingebroken wordt. Eenvoudig te integreren met Busch free@home.

Theben breidt zijn aanbod aan KNX-producten uit met nieuwe draadloze inbouw KNX-actoren en mediakoppelaar. Dankzij versleuteling door KNX Data Secure is de combinatie optimaal beschermd tegen afluisteren en manipulatie.

The KAA-8R Universal Actuator is suitable for different load situations and possible for many application areas up to 8 independent channels. It receives KNX telegrams and can be used as switch actuator or shutter actuator (planned). Mixed applications from switch and shutter actuator are possible. Each output uses a bistable (latching) relay and can be operated manually via a push button. One green LED per channel for indicating the switching status. The compact design with 4 units (72 mm) wide modular makes it suitable for quick and simple installation. Other functions including heating control and logic functions are integrated to provide the KNX system integrators with high design freedom.

The KAA-4R4V dimming actuator is a 4 channels device with high-quality independent latching relay. A DC 0(1)-10V signal to perform the dimming on the connected driver at each channel. The dimming curve can be adjusted to linear or logarithmic mode which is suitable for all kinds of luminaire. The product specification indicates the maximum number of LED driver per channel which is easy for building planning. KNX system integrators can easily program it through the ETS system, and it can be operated manually via a push button. The compact design with 4 SU(72mm) wide modular makes it suitable for quick and simple installation, and one green LED on each channel for indicating the switching status.

LCM-40/60KN series is a 40W/60W AC/DC constant current mode output LED driver featuring the multiple levels selectable by dip switch and the KNX interface to avoid using the complicated KNX-DALI gateway. This series operates from 180~295VAC and offers different current levels ranging between 350mA and 1050mA.